NEC UNIVERGE SV9100 Features And Specifications page 694

Required Component(s)
GPZ-IPLE Daughter Board installed
System Version R1 License (0411)
System Port License (0300)
VoIP Resource license (5103)
IP Terminal (5111)
NAT Traversal License (0031)
Related Features
None
Guide to Feature Programming
IP Multiline Station (SIP):
Program
Program Name/Description
Number
GCD-CP10 Network Setup – IP Address
10-12-01
Assign the IP Address for the CPU NIC card.
When an GPZ-IPLE card is installed in the
system, it is recommended to set this Program
to 0.0.0.0.
GCD-CP10 Network Setup – Default
10-12-03
Gateway
Assign the default gateway IP address for the
GCD-CP10.
GCD-CP10 Network Setup – IP Address
10-12-09
Set IP address for GPZ-IPLE.
The IP Address assigned in Program 10-12-01
cannot start with the same leading digits as the IP
Address assigned here.
GCD-CP10 Network Setup – Subnet Mask
10-12-10
Set the subnet mask of the GPZ-IPLE.
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
128.0.0.0 | 192.0.0.0 | 224.0.0.0
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
|254.0.0.0 | 255.0.0.0
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
|255.254.0.0 | 255.255.0.0
|255.255.128.0 | 255.255.192.0
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
694
Default
192.168.0.10
0.0.0.0
172.16.0.10
255.255.0.0