NEC UNIVERGE SV9100 Features And Specifications page 861

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

A Message Waiting key simplifies this feature operation.

Telephone-to-telephone Message Waiting works when the voice mail is installed.

The MW (Message Waiting) LED may be used to indicate voice mail messages if no

extension number is assigned to the voice mail key in system programming

If the following programs are changed while the phone is online, a reset of the feature is

required before the setting takes effect.

For example, if a message waiting was set before any of these programs were changed, the

lamp remains the same until the message waiting is set again.

If both Voice Mail Message and Message Wait indication are set, the color set for Message

Wait overrides the color used for Voice Mail Message indication.

When the system has the Hotel Motel license (0007), the Message Waiting Indication

(MWI) on a DSS Console for an extension is a Green LED. Without the Hotel Motel license

the MWI on a DSS Console for an extension is a Red LED.

Default Settings

System Availability

All Terminals

Required Component(s)

Related Features

Handsfree Answerback/Forced Intercom Ringing

Programmable Function Keys

Voice Response System (VRS)

15-02-35 Message Waiting Lamp Cycle for Calling Extension

15-02-36 Message Waiting Lamp Cycle for Called Extension

15-02-37 Voice Mail Message Wait Lamp Color

15-02-38 Voice Mail Message Wait Lamp Cycle