Calling Party Number Presentation - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
20-06-01 Class of Service for Extensions
Assign a Class of Service to an extension
(1 ~ 15).
20-08-16 Class of Service Options (Outgoing Call
Service) – Display E911 Dialed Extension
Name and Number
Turn Off or On an extension ability to display
the name and number of the extension that
dialed 911.
System Options for Outgoing Calls – Dial
21-01-12
E911 Routing Without Trunk Access
If Enabled (1), an extension user can dial 911
without first dialing a trunk access code or
pressing a line key. If Disabled (0), an extension
user must dial a trunk access code (e.g., 9) or
press a line key before dialing 911. If enabled,
#
dialing 9+911
System Options for Outgoing Calls – Alarm
21-01-13
Ring Timer (E911)
Set the duration of the E911 Alarm Ring Time. If
set to 0, the E911 Alarm does not ring.
21-02-01 Trunk Group Routing for Extensions
Assign the routes set in Program 14-06 to
extensions. This program and Program 14-06
are the minimum required if E911 must seize a
line to dial.

Calling Party Number Presentation:

Program
Program Name/Description
Number
ETU Setup (PRTA Pkg Setup) – CLIP
10-03-05
Information
Based on this setting, the system includes a
Presentation Allowed (1) or Presentation
Restricted (0) in the Setup message to allow/
deny the Calling Party Number. Program
15-01-04 must also be set to 1 if this option is
enabled.
Basic Extension Data Setup – ISDN Caller ID
15-01-04
If both Program 15-01-04 and Program 10-03-
05 are Enabled, the system includes Caller ID
in the Setup message as Presentation Allowed.
If these options are Disabled, it is Presentation
Restricted.
still dials out.
Input Data
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 = Trunk Access Code
Required
1 = Trunk Access Code Not
Required
0 ~ 64800 seconds
1 ~ 100 (Trunk Groups)
0 ~ 100
(0 = No Setting)
Input Data
0 = Disable
1 = Enable
0 = Disable
1 = Enable
472
Default
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 0
1
0
1
Default
1
1