Assign Trunks As Automated Attendant Trunks – Method 1 - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
22-08-01 DIL/IRG No Answer Destination
Assign the DIL No Answer Ring Group.
System Options for Transfer – MOH or
24-02-02
Ringback on Transferred Calls
Enable/Disable MOH on Transfer. If set to 0, a
transferred caller hears Music on Hold while
their call rings the destination extension. If set
to 1, a transferred caller hears ringback while
their call rings the destination extension. For
this option to work with voice mail, the
transferred call must be an unscreened
transfer.
Assign Trunks As Automated Attendant Trunks – Method 1:
Program
Program Name/Description
Number
22-02-01 Incoming Call Trunk Setup
Assign Service Type 4 to each trunk you want
to ring into Voice Mail as a Direct Inward Line
(DIL).
22-07-01 DIL Assignment
Assign the master/pilot number of the voice
mail group from Program 11-07-01 as the DIL
destination. If all Voice Mail ports are in the
same unique Extension (Department) Group
(see Program 16-02 above), the DIL rings
another Voice Mail port if its assigned port is
busy.
For this selection to work, set Program 22-02-01 to
4 (DIL).
Input Data
0 (No Setting)
001 ~ 100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
103 = Centralized VM
0 = Hold Tone
1 = Ring Back Tone
Input Data
Trunks 1 ~ 400
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
Day/Night Modes (1 ~ 8):
Extension Number (maximum of
eight digits)
Pilot Number
587
Default
1
0
Default
0
No Setting