NEC UNIVERGE SV9100 Features And Specifications page 596

Program
Program Name/Description
Number
SV9100 InMail Station Mailbox Options –
47-02-11
Auto Time Stamp
Enable/Disable Auto Time Stamp for the
Subscriber Mailbox. If enabled, after the
subscriber listens to a message InMail
announces the time and date the message was
left. Auto Time Stamp also announces the
message sender (if known).
A subscriber can also enable Auto Time Stamp
from their mailbox.
SV9100 InMail Station Mailbox Options –
47-02-12
System Administrator
Designate the Subscriber Mailbox as a System
Administrator. This allows the subscriber to use
the SA options after logging into their mailbox.
SV9100 InMail Station Mailbox Options –
47-02-13
Dialing Option
Dialing Option provides additional dialing
options for Next Call Routing Mailbox calls (see
Next Call Routing Mailbox below). If enabled, a
caller who accesses the Subscriber Mailbox to
leave a message can dial any option in the Next
Call Routing Mailbox Dial Action Table. If
disabled, the caller can dial only 0 (to use the
Next Call Routing Mailbox 0 action).
SV9100 InMail Station Mailbox Options –
47-02-14
Next Call Routing Mailbox
Assign a Next Call Routing Mailbox to the
Subscriber Mailbox. This provides callers with
additional dialing options while listening to a
Subscriber Mailbox recorded or default
greeting. The digits the caller can dial depends
on the setting of the Next Call Routing Mailbox
and Alternate Next Call Routing Mailbox
options.
SV9100 InMail Station Mailbox Options –
47-02-15
Directory List Number
Set up a station/extension mailbox directory list.
SV9100 InMail Station Mailbox Options –
47-02-26
Auto Play
Use this option to set the Subscriber Mailbox
message Auto Play option. When a subscriber
logs into their mailbox, InMail can automatically
play new messages, or not.
SV9100 InMail Group Mailbox Options –
47-03-02
Mailbox Number
The Group Mailbox Number is the same as the
Department Group master (pilot) number. Use
this option to select the Department Group
master (pilot) number associated with the
Master Mailbox you are programming.
Input Data
0 = Disable
1 = Enable
0 = No (Disable)
1 = Yes (Enable)
0 = Disable
1 = Enable
Call Routing Mailbox Number (1
~ 3 digits, 01 ~ 016) No entry
(Entered by pressing CLEAR)
0 = None
1 ~ 8 = List Number
* = All
0 = Disabled
1 = Enabled
Digits (maximum of eight using 0
~ 9)
No Setting (entered by pressing
Hold)
596
Default
0
Mailbox 1 (101)
= 1
Other mailboxes
= 0
0
1 (Call Routing
Mailbox 01)
By default, Call
Routing Mailbox
numbers are
01 ~ 08
0
0
No Setting