NEC UNIVERGE SV9100 Features And Specifications page 697

Program
Program Name/Description
Number
84-22-03 DT800/DT700 Multiline Logon Information
Setup – User ID Omission
Enable/Disable User ID Omission.
Used when the registration mode (10-46-01) is set
to manual. When the phone prompts for a login, the
previous user ID appears so the user only has to
enter the password.
84-22-04 DT800/DT700 Multiline Logon Information
Setup – Log Off
When the registration mode (10-46-01) is set to
manual, and the phone prompts for a login, the
previous user ID appears so the user only has
to enter the password.
When enabled, the extension assigned to the
Personal ID Index can be logged off or
overridden by another IP multiline station or
Softphone.
In Manual mode a user can also Logoff the IP
phone to allow another user to login with their own
user ID and password.
To Logoff the IP phone:
Press the Down Arrow Softkey, press the Prog
Softkey, and then press the LOGOFF Softkey.
84-22-05 DT800/DT700 Multiline Logon Information
Setup – Nick Name
Input the Personal ID from terminal
automatically when log on again.
84-24-28 DT800/DT700 Multiline CODEC Basic
Information Setup – Audio Capability
Priority
Assign the Codec for the NEC DT700 IP
Phone.
IPL Basic Setup – IP Address
84-26-01
Assign the IP address for each DSP on the
GPZ-IPLE.
IPL Basic Setup – RTP Port Number
84-26-02
Assign the RTP port number to be used for
each DSP on the GPZ-IPLE.
Only even numbered ports are supported.
Input Data
0 = Off
1 = On
0 = Off
1 = On
Maximum of 32 characters
0 = G.711
1 = G.729
2 = G.722
xxx.xxx.xxx.xxx
0 ~ 65534
697
Default
0
1
No Setting
0
172.16.0.20
10020