NEC UNIVERGE SV9100 Features And Specifications page 814

In 15-07-01, do not assign
No
function keys as line keys.
In 15-07-01, do not
assign Trunk Group No
Access or trunk group keys.
Adjust the CODEC Gain
in 14-01-02 (transmit) Trunks
and 14-01-03 (receive).
Stop No
In 21-15-01, enter the
extension number and
Yes
enter the Trunk Group
Routing route number.
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
B
Is the amount of time the system waits before
placing the call in a talk state sufficient?
Yes
Should extension users
have one-button placing
of outside calls?
Should extension users have
one-button access to trunk
groups for placing calls?
Do you want to adjust
the gain (volume) for
trunks?
No
Check the Analog Trunk Timers in 81-01
for compatibility with the telco.
If desired, assign names to
trunks in 14-01-01.
Do you want to set up
an Alternate Trunk
Route Access Code?
In 11-09-02, assign the
Service Code set up in the
previous step for Alternate
Trunk Route Access.
Should extension be
able to use Alternate
Trunk Route Access?
Is Trunk Group
Routing defined?
Stop
814
In 21-01-03, enter
the interval for the
No
trunk interdigit timer.
In 15-07-01, assign
Yes function keys as line
keys (code *01+001- 200).
In 15-07-01, assign CAP Keys
Yes
(*08) or line group keys (*02).
See "CAP Key" in the
Feature & Specification
manual for more details.
For example, to make
50 the Alternate Trunk
Route Access Code:
DIAL = 5
Digit = 2
Kind = 8
In 11-01-01, set up a
Service Code for
Yes
Alternate Trunk Route
Access.
In 21-15-01, enter the
extension number
No
and enter 0 to
prevent routing.