NEC SV9100 Quick Reference Manual

FUNCTION KEYS
Cursor
Recall
Press this key to terminate current call and reseize dial tone.
Feature
Used to activate terminal setup functions and to program One-Touch keys.
Answer
When the LED on this key is flashing, press the key to answer a waiting call.
Hold
Press this key to put a call on hold
Transfer
Allows the extension user to transfer a call or make a second call.
Menu
From this key, the user may access additional functions such as Call History and Directory.
Soft Keys
Any feature shown at the bottom of the LCD is available. The appropriate feature key is
displayed on the screen according to the call handling process.
Programmable keys
These keys can be programmed as either Flexible Line key, Programmable Feature key or
One-Touch Speed Dial key.
1300 338 266
NEC SV9100 6/24/32 BUTTON DIGITAL/IP HANDSET
QUICK REFERENCE GUIDE
MAKE A CALL
Internal Call
•
Dial Internal Extn No. or Press DSS Key
•
Lift Handset or speak handsfree
External Call
•
Dial 0 then the external no.
•
Lift Handset
LAST NUMBER REDIAL:
•
Without lifting handset, press REDIAL button.
•
Press the Cursor key up/down to search the required number.
•
Press # or SPEAKER to initiate call.
HOLD:
•
While on a call, ask Caller to Please Hold.
•
Press HOLD key – held key flashes.
•
You may replace handset if you wish.
To Retrieve Call
•
Lift handset.
•
Press flashing Line
TRANSFER:
•
With a call in progress
•
Press DSS Key
•
Or Press TRANSFER and dial Extn and announce the call (optional).
•
Replace handset.
NOTE:
If the called extension is busy or does not answer, press the flashing Line, or the Conf key
to return to your caller. If the extension is busy, replace handset to initiate a camp-on.
Unanswered camp-on calls and unscreened transfers will recall to your extension.