NEC UNIVERGE SV9100 Features And Specifications page 817

Guide to Feature Programming

The items highlighted in gray are read only and cannot be changed.
Program
Program Name/Description
Number
GCD-CP10 Network Setup – IP Address
10-12-01
Assign the IP Address for the CPU NIC card.
When an GPZ-IPLE card is installed in the
system, it is recommended to set this Program
to 0.0.0.0.
GCD-CP10 Network Setup – Default
10-12-03
Gateway
Assign the default gateway IP address for the
GCD-CP10.
GCD-CP10 Network Setup – IP Address
10-12-09
Set IP address for GPZ-IPLE.
The IP Address assigned in Program 10-12-01
cannot start with the same leading digits as the IP
Address assigned here.
10-19-01 VoIP DSP Resource Selection
Select type of GPZ-IPLE DSP Resource. This
program setting has no affect on the terminal/
trunk port assignment or usage.
License Information – License Name
10-50-01
Confirm license information that is stored in a
system.
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0 = Common use for both IP
extensions and trunks
1 = IP Extension
2 = SIP Trunk
3 = CCIS/Networking
4 = Use for NetLink 5
= Blocked
6 = Common without Unicast
Paging
7 = Multicast Paging
8 = Unicast Paging
817
Default
192.168.0.10
0.0.0.0
172.16.0.10
Resource 1 = 1
Resource
2 ~ 256 = 0