Delay Announcement - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
Call Progress Tone Detector Setup – Detect
80-04-01
Level
Define the various levels and timers for the Call
Progress Tone Detector.
Use this option to set the Detection Level.

Delay Announcement:

Only use if Announcement Mailboxes are used for Delay Announcements.
Program
Program Name/Description
Number
Voice Mail Delay Announcement – Delay
41-19-01
Message Start Timer
Determine the time the system waits before
playing the Delay Message.
Voice Mail Delay Announcement – Mailbox
41-19-02
Number for 1st Announcement Message
Assign Voice Mail Announcement Mailbox as
the message source for the 1st Announcement
Message.
Voice Mail Delay Announcement – 1st Delay
41-19-03
Message Sending Count
Determine the 1st Delay Message Sending
Count. This entry must be set to 1 or higher for
the message to play.
Voice Mail Delay Announcement – Mailbox
41-19-04
Number for 2nd Announcement Message
Assign Voice Mail Announcement Mailboxes
as the message source for the 2nd
Announcement Message.
Voice Mail Delay Announcement – 2nd Delay
41-19-05
Message Sending Count
Determine the 2nd Delay Message Sending
Count. This entry must be set to 1 or higher for
the message to play.
Voice Mail Delay Announcement – Wait Tone
41-19-06
Type at Message Interval
Determine what the caller hears between the
messages.
Input Data
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
Input Data
0 ~ 64800 seconds
Dial (maximum of eight digits)
0 = No message is played.
1 ~ 255
Dial (maximum of eight digits)
0 = No message is played.
1 ~ 255
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music Source
607
Default
Type 1 (DT) – 0
(-25dBm)
Type 2 (BT) – 0
(-25dBm)
Type 3 (RBT) – 0
(-25dBm)
Type 4 (SBT) – 0
(-25dBm)
Type 5 – 0
Default
0
No Setting
0
No Setting
0
0