To Return Call From The Um8000 Mail; To Return Call From Inmail - NEC UNIVERGE SV9100 Features And Specifications

Guide to Feature Programming
Program
Program Name/Description
Number
Basic Trunk Data Setup – Caller
14-01-22
ID to Voice Mail
Enable/Disable the system ability
to send the Caller ID digits to voice
mail.
Analog Trunk Data Setup – Caller
14-02-10
ID
Enable (1)/Disable (0) a trunk to
receive Caller ID information.
15-02-04 Multiline Telephone Basic Data
Setup – Redial (Speed Dial)
Control
Control the function of the
extension Redial key when used
with Speed Dialing. The Redial key
can access either the Common or
Group Speed Dialing numbers.
Operation

To return call from the UM8000 Mail:

1. While listening to a message with CID information press More, More then Call softkeys.
- OR -
Dial , 0.
#
2. To exit from the call, hang up.

To return call from InMail:

1. While listening to a message with CID information press More, More then Call softkeys.
- OR -
Dial 6, 2 (MC).
2. To exit from the call, hang up.
If you hear "Your call cannot go through," your system Caller ID is not properly set up. You will be

returned to the listen mode for the message you were listening to when you tried the Make Call.
Input Data
Trunks 1 ~ 400
0 = Disable
1 = Enable
Trunks 1 ~ 400
0 = Off (Caller ID not displayed.)
1 = On (Caller ID is displayed.)
0 = Common Abbreviated Dial
1 = Group Speed Dialing
101
Default
0
0
0