Checking Messages; Leaving A Message (Multiline Terminal Only); Forwarding Calls To Your Mailbox - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Lift the handset and dial

If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox

number instead. You can also use this procedure from your own telephone to call a co-worker's

If requested by Voice Mail, enter your security code.

Checking Messages

If Program 15-02-26 = 0 (Message Key):

Press the Message key once.

The user can use the VOL UP and VOL DOWN keys to view the new messages. If there are both voice

mail messages and Message Waiting calls, the display indicates the number of new voice mail

messages and then each Message Waiting call is shown.

When there are new messages, the Message Waiting LED on the telephone will flash red.

To return a displayed Message Waiting, press the Speaker key or lift the handset.

To return a displayed Message Waiting, press Speaker or lift the handset.

To listen to the voice messages, with Voice Message displayed, press Speaker or lift the

The voice mail is called.

The voice mail is only called if there are new messages. If the display indicates Check Messages No

Messages, press the Exit key to return the telephone to idle.

If Program 15-02-26 = 1 (Voice Mail Key):

Press the Message key once.

The voice mail is called.

When there are new messages, the Message Waiting LED on the telephone flashes red.

With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail

or transfer call a to voice mail (Hold + MSG + Extension Number), etc.].

To leave a message in the mailbox of an unanswered extension (the extension you call can be

busy, in DND or unanswered):

Press the Voice Mail key (Program 15-07 or SC 851: code 77 + InMail pilot).

Press the Message key on telephone, if equipped.

The Voice Mail System prompts you to leave a message.

To activate or cancel Call Forwarding:

Press Speaker (or lift the handset at the single line telephone) and choose from the following dial