NEC UNIVERGE SV9100 Features And Specifications page 187

Related Features

Call Forwarding

Contact Centre

Directed Call Pickup

Direct Inward Dialing (DID)

Direct Inward Line (DIL)

Direct Inward System Access (DISA)

Do Not Disturb

Group Call Pickup

ISDN Compatibility

Line Preference

Long Conversation Cutoff

Night Service

Programmable Function Keys

Selectable Display Messaging

Warning Tone for Long Conversation
Guide to Feature Programming
Program
Program Name/Description
Number
10-03-XX ETU Setup
Use program 10-03-XX to setup and confirm
the basic configuration data for each blade.
This program represents different data
depending on the blade installed in the slot.
11-11-13 Service Code Setup (for Setup/Entry
Operation) – Display Language Selection for
Multiline Terminal
Select the service code which can be used at
an extension to change the displayed language
on a multiline terminal display.
11-11-20 Service Code Setup (for Setup/Entry
Operation) – Change Incoming CO and ICM
Ring Tones
Customize the change incoming CO and ICM
ring tones used for registration and setup.
Input Data
The assigned data varies
depending on the blade installed
in the slot.
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
187
Default
778
820