NEC UNIVERGE SV9100 Features And Specifications page 1052

Program
Program Name/Description
Number
Service Code Setup (for Service Access) –
11-12-64
Security Sensor Mode Start
Service code + 1, after the timer (Program
20-55-01) passes, sensor signal is valid.
Service code + 0, sensor signal is invalid.
Speed Dialing Number and Name – Speed
13-04-01
Dialing Data
Enter the System and Group Speed Dialing
numbers and names.
15-07-01 Programmable Function Keys
Assign a function key for Warning Message
*
(code 32).
15-07-01 Programmable Function Keys
Assign a function key for Sensor Mode (code
*
33).
System Options – Emergency Call Setting of
20-01-19
Remote Inspection Feature when the Target
is in Off-Hook Status
Assign to make an emergency call when the
inspection target is in off hook status.
20-08-23 Class of Service Options (Outgoing Call
Service) – Display Indication for Security
Sensor Detection
Enable(1) or Disable(0) an extension's ability to
display indication for security sensor detection.
20-08-24 Class of Service Options (Outgoing Call
Service) – Display Indication for Emergency
Call by Remote Inspection
Enable(1) or Disable(0) an extension's ability to
display indication for emergency call by remote
inspection.
System Option when Long Conversation –
20-21-05
Conversation Cutoff for Remote Monitor
Watch Mode Setup – Internal Paging Group
20-44-01
for Watch Message
Define Internal paging group number for
Watching message.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
Maximum of 24 digits.
#
1 ~ 9, 0, *,
Pause (Press line key 1)
Recall/Flash (Press line key 2)
@ = Code to wait for answer
supervision in ISDN (Press line
key 3)
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 = Not Call
1 = Call
0 = Disable
1 = Enable
0 = Disable
1 = Enable
0 ~ 64800 seconds
0 = No Internal Paging
1 ~ 64 = Internal Paging Group
Number
1052
Default
819
No Setting
0
0
0
180
0