NEC UNIVERGE SV9100 Features And Specifications page 743

Program
Program Name/Description
Number
License Configuration for Each Package –
10-54-01
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
If applying more than 255 licenses to a slot, the
licenses must be applied across multiple
indexes.
For example, assigning 256 VoIP resource
licenses (5103) to the CPU slot could be
assigned using different methods as long as the
total for the CPU slot is 256.
1. Index 1 has 128 of feature code 5103 and
index 2 also has 128 of feature code 5103 for a
total of 256.
2. Index 1 has 255 of feature code 5103 and
index 2 has 1 of feature code 5103 for a total of
256.
10-58-01 DT800/DT700 Intranet Local Network Area
Setup – Network Address
This program sets the IP or Network address
for phones that are not to be routed through the
NAPT translations.
For example, if a system had multiple NAPT
phones and another site, with multiple IP
phones connected via a VPN connection, you
would not want the phones connected over the
VPN to use the NAPT feature. The network
address (or single IP phone addresses) of the
Remote location would be entered here. This is
for the IP Phones at this location to not use the
NAPT feature.
10-58-02 DT800/DT700 Intranet Local Network Area
Setup – Subnet Mask
This program sets the netmask for the IP
Addresses assigned in Program 10-58-01.
Input Data
1 ~ 255 Resource Licenses
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
128.0.0.0 | 192.0.0.0 | 224.0.0.0
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
|254.0.0.0 | 255.0.0.0
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
|255.254.0.0 | 255.255.0.0
|255.255.128.0 | 255.255.192.0
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
743
Default
0
0.0.0.0
255.255.0.0