NEC UNIVERGE SV9100 Features And Specifications page 769

Hide thumbs Also See for UNIVERGE SV9100:
Table of Contents

Advertisement

Program
Program Name/Description
Number
21-19-01
IP Trunk (SIP) Calling Party Number Setup
for Extension
Assign the Calling Party Number for each
extension. The assigned number is sent to the
central office when the caller places an
outgoing call. If the Calling Party Number is
assigned by both Program 21-17 and Program
21-18/Program 21-19, the system uses the data
in Program 21-18/Program 21-19.
22-02-01
Incoming Call Trunk Setup
Assign the incoming trunk type for each trunk.
44-02-01
Dial Analysis Table for ARS/F-Route Access
– Dial
Set the Dial digits for the Pre-Transaction Table
for selecting ARS/F-Route (eight digits max:
, @). To enter a wild card/don't care
#
1 ~ 9, 0 *
digit, press Line Key 1 to enter an @.
44-02-02
Dial Analysis Table for ARS/F-Route Access
– Service Type
Set the Service Type (0 ~ 3) for the Pre-
Transaction Table for selecting ARS/F-Route.
44-02-03
Dial Analysis Table for ARS/F-Route Access
– Additional Data
If a Service Type is selected in Program
44-02-02, set the additional data, if required, for
the Pre-Transaction Table for selecting ARS/F-
Route (24 digits max: 1 ~ 9, 0 *
wild card/don't care digit, press Line Key 1 to
enter an @.
ARS/F-Route Table – Trunk Group Number
44-05-01
Assign the trunk group to be used by the ARS/
F-Route Table.
ARS/F-Route Table – Maximum Digit
44-05-09
Input the maximum number of digits to send
when using the F-Route.
#
,
1 ~ 0, *
(Profile 1 ~ Profile 2)
Trunks 1 ~ 400
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
Maximum of eight digits.
(Use line key 1 for a 'Don't Care'
digit, @)
0 = No Setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
1 = Delete Digit = 0 ~ 255
(255: Delete All Digits)
2 = 0 ~ 500
(0 = No Setting)
3 = Dial Extension Analyze
#
, @). To enter a
Table Number = 0 ~ 4
(0 = No Setting)
0 ~ 100, 255
0 = No Setting
255 = Extension Call
0 ~ 24
769
Input Data
Maximum of 16 digits
Default
No Setting
0
No Setting
0
0
0
0

Advertisement

Table of Contents
loading

Table of Contents