NEC UNIVERGE SV9100 Features And Specifications page 995

Required Component(s)
None
Related Features

Call Forwarding

Central Office Calls, Placing

Do Not Disturb

Line Preference

Prime Line Selection

Programmable Function Keys

Single Line Telephones, Analog 500/2500 Sets

Transfer

InMail
Guide to Feature Programming
Program
Program Name/Description
Number
Basic Trunk Data Setup – Private Line
14-01-09
Determine if a trunk should be used as a
Normal or Private line.
A Private Line reserves a trunk for a multiline
terminal for placing and answering calls. A user
with a Private Line always knows when important
calls are for them. Additionally, the user has their
own trunk for placing calls that is not available to
others in the system.
Trunk Access Map Setup – Trunk Port
14-07-01
Number
Assign Private Line to the Private Line Access
Map (refer to Program 15-06 in this section).
Use option 5 for Incoming, option 7 for Both
Ways and option 4 for Outgoing. In all other
Access Maps, assign option 3 to the Private
Line.
Input Data
0 = Disable Private Line
(Normal)
1 = Enable Private Line (Private
Line)
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
995
Default
0
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).