Calling Your Mailbox - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
Voice Mail Delay Announcement – Forced
41-19-07
Disconnect Time after 2nd Announcement
Assign the time the system waits after the end
of the delay message before disconnecting.
Voice Mail Delay Announcement – Delayed
41-19-08
Message Interval Time
Set the time between Delayed Messages.
SV9100 InMail Group Mailbox Options –
47-03-02
Mailbox Number
The Group Mailbox Number is the same as the
Department Group master (pilot) number. Use
this option to select the Department Group
master (pilot) number associated with the
Group Mailbox you are programming.
SV9100 InMail Group Mailbox Options –
47-03-03
Mailbox Type
Set the Group Mailbox type.
Operation

Calling Your Mailbox

To call your mailbox:
With a multiline terminal, your Voice Mail key flashes green and your Message Centre keys flash red
when they have messages waiting. If you do not have a Voice Mail key, your Message Waiting LED
flashes instead.
Multiline Terminal
1. Press your Voice Mail key (Program 15-07 or SC 851: 01 +
- OR -
Press the Vmsg softkey.
- OR -
Press the Message key on the telephone, if equipped.
 Your mailbox number is normally the same as your extension number. You may optionally dial a
co-worker's mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
- OR -
Press Speaker and dial
2. If requested by Voice Mail, enter your security code.
 Ask your Voice Mail system administrator for your security code.
 Normally, your Message Waiting (MW) LED goes out (if applicable). If it continues to flash, you have
unanswered Message Waiting requests or a new General Message. See "To check your messages"
below.
Single Line Telephone
0 ~ 64800 seconds
0 ~ 64800 seconds
Digits (maximum of eight using
0 ~ 9)
No Setting (entered by pressing
Hold)
0 = None
1 = Subscriber
2 = Routing
.
717
608
Input Data
No Setting
8).
*
Default
0
20
1