NEC UNIVERGE SV9100 Features And Specifications page 334

Program
Program Name/Description
Number
11-11-27 Service Code Setup (for Setup/Entry
Operation) – Destination of Automatic
Transfer Each Extension Group
Set the service code for setting the destination
for immediate automatic transfer for ICM and
transferred calls to Department Groups.
11-11-28 Service Code Setup (for Setup/Entry
Operation) – Delayed Transfer for Every
Extension Group
Set the delayed transfer destination
Department Group.
11-11-29 Service Code Setup (for Setup/Entry
Operation) – Delayed Transfer Cancellation
for Each Extension Group
Cancel the delayed transfer destination
Department Group.
Service Code Setup (for Service Access) –
11-12-09
Change to STG (Department Group) All Ring
Set the service code for ringing all members of
a Department Group.
Single Digit Service Code Setup –
11-16-10
(Department) STG All Ring Mode
Assign the Single Digit (post-dialing) Service
Code for All Member Ring.
15-07-01 Programmable Function Keys
Assign a Department Calling key (46) so
extension users can install or remove
themselves from the Department Calling
Group. Additional keys can also be assigned for
Department Group features immediate calling
destination (58), delayed calling destination
(59) and DND destination (60).
Department Group Basic Data Setup –
16-01-01
Department Name
Assign a name to the Extension (Department)
Groups.
Department Group Basic Data Setup –
16-01-02
Department Calling Cycle
Set the routing cycle for calls into a department
(i.e., when a user dials the department pilot
number). The system can ring the highest
priority extension available (Priority Routing, 0)
or cycle in circular order to a new idle extension
for each new call (Circular Routing, 1).
Input Data
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
*
#
0 ~ 9, , Maximum of one digit
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Maximum of 12 characters
0 = Normal Routing (Priority)
1 = Easy – UCD Routing
(Circular)
334
Default
704
705
706
No Setting
No Setting
No Setting
0