Dionex ICS-5000 Operator's Manual
Electrical Connections
Electrical connectors provide a connection from the components installed in
the EG to the EG power supplies. There are two sets of electrical connectors
(one per channel). Connections for the following components are provided:
•
Two EGCs or one EGC and one EPM
and
•
Two CR-TCs
When operating with an EGC III K
connected to the EGC power supply for one channel and the EPM is
connected to the EGC power supply for the second channel. Thus, the EG can
accommodate only one such configuration.
44
CO
and the EPM III, the EGC is
2
3
Doc. 065342-06 12/11