Thermo Scientific Dionex ICS-5000 Operator's Manual page 193

2. The sequence is appended to the instrument queue and a Ready Check is
performed. If the Ready Check passes and the instrument is not currently
running another sequence, the sequence is started.
Starting a Sequence in Chromeleon 6.8
1. On the Sequence Control panel, click Load Sequence (see
2. Select the sequence from the list and click Open. The sequence is added
to the Sequence table.
3. Click Start Batch (see
Doc. 065342-06 12/11
Figure 5-6. Running Sequence in Chromeleon 7
Figure
Figure 5-7. Starting a Sequence in Chromeleon 6.8
5-7).
5 • Operation
Figure 5-7).
177