Thermo Scientific Dionex ICS-5000 Operator's Manual page 104

Dionex ICS-5000 Operator's Manual
The relays can be programmed to switch any low-voltage device. Switched
current must be no more than 2 A at 24 VDC. Refer to
documentation for the external device for connection instructions.
RELAY OUTPUT CONFIGURATION
N.O.
COM
N.C.
N.O.
COM
N.C.
88
Rear Panel Relay Output
Pins (on DC Electronics)
Non-Energized Relay
Energized Relay
Figure 2-35. Relay Output Configuration
Section 2.17.1
NOTES
The relays are capable of
switching 2 A at 24 VDC.
For a normally open
connection, connect a
COM pin and an N.O. pin.
For a normally closed
connection, connect a
COM pin and an N.C. pin.
Doc. 065342-06 12/11
and the