Thermo Scientific Dionex ICS-5000 Operator's Manual page 137

Use the 6-pin mini-DIN signal cable (P/N 6000.1004) provided in the TC
Ship Kit (P/N 064789) to connect the TC to an external device. For details
about the pin assignments, refer to
Pin Signal Name
1 Not occupied
2 Not occupied
3 Digital_GND
5 Digital Input
6 Relay_N.O.
8 Relay_Com
Table 2-5. Pin Assignments for the TC Mini-DIN Signal Cable
USB Receptacle
The USB (Universal Serial Bus) receptacle ("B" type connector) provides a
connection to the PC on which Chromeleon is installed. Select one of the
following methods to establish the connection:
•
Connect the TC directly to the USB receptacle on the PC.
•
Connect the TC to the PC through another USB device in the system (for
example, the pump).
The TC Ship Kit (P/N 064789) includes a 1 m (3 ft) USB cable (P/N 063246).
Drain Port
The drain port removes any liquid that collects in the drip tray in the bottom
of the TC. A clear corrugated drain hose (P/N 055075) is connected to this
port during installation. Place the drain hose into a waste container. To
maintain a positive siphon, position the waste container below the level of the
TC.
For correct drainage, make sure the drain hose is not bent, pinched, or
elevated at any point. Do not allow the end of the hose to be submerged
in waste liquid.
Doc. 065342-06 12/11
Table 2-5.
Signal Level
----
----
0 V
0 to +5 V
100 V /0.25 A/3 W
DC
100 V /0.25 A/3 W
DC
2 • TC Description
Core Core Label
Color
Pink Analog High
Gray Analog Low
Green Digital GND
Yellow Digital Input
Brown Digital Output
White Dig./Out (GND)
Black Shield
121