Thermo Scientific Dionex ICS-5000 Operator's Manual page 226

Dionex ICS-5000 Operator's Manual
TC-Related Audit Trail Error Message
Can't use device "x" as a source of the column
pressure. Please check the property "y" for a
valid device name. The device must have the
"Pressure" property available.
Card data checksum error.
Command is not available in demo mode.
Communication error: x.
Communication time-out.
Configuration doesn't match. X not installed.
Configuration mismatch (x — CM uses y,
Column Compartment uses z). Please use the
Server Configuration program to check the
installation.
Current flow is out of limits defined for the
column.
Current pressure is out of limits defined for the
column.
Current temperature is out of limits defined for
the column.
Data buffer overrun.
Device control feature is not available! Please
check key code and CM Features (see "About
Chromeleon..." in the client's Help menu).
Device is not remote.
Device not found on the USB.
Either the current date is later than the
expiration date for x or the program or batch will
end later than 24 hours before the expiration
time for y.
Error deleting flash memory.
Error during storing of the card data to the chip
card.
210
Table 8-4. TC Error Messages (Continued)
Default See
Severity
Level
Error page 278
Error page 279
Abort page 279
Abort page 279
Abort page 280
Warning page 280
Abort page 280
Warning page 280
Warning page 281
Warning page 281
Abort page 281
Abort page 282
Abort page 282
Abort page 283
Warning page 283
Abort page 283
Error page 284
Doc. 065342-06 12/11