Thermo Scientific Dionex ICS-5000 Operator's Manual page 19

Product Type
Detector (inside DC)
Accessory (inside DC)
Detector (outside DC)
Thermal Compartment
Autosampler
Mass Spectrometer
Dionex ICS-5000 Dual Pump (DP) and Dionex ICS-5000 Single Pump (SP)
Each Dionex ICS-5000 pump can be configured for either capillary IC
applications or analytical (standard bore and microbore) IC applications.
Capillary IC pumps are always isocratic (they deliver one eluent). Analytical
IC pumps can be either isocratic or low pressure proportioned gradient.
Gradient pumps deliver gradient mixtures of up to four eluent components.
The eluent composition selected for a gradient pump can be delivered as
isocratic, isocratic proportioned, linear ramp, step, curved, or any
combination of these.
The SP contains one of the following pump types:
•
Isocratic capillary IC pump
•
Isocratic analytical IC pump
•
Gradient analytical IC pump
The DP contains two pumps in any combination of the three types listed
above (for example, two isocratic capillary IC pumps, or two isocratic
analytical IC pumps, or one isocratic capillary IC pump and one gradient
analytical IC pump).
Doc. 065342-06 12/11
Product Name
Dionex ICS-5000 Conductivity
Detector
Dionex ICS-5000 Electrochemical
Detector
Dionex ICS-5000 Automation
Manager
ICS Series Photodiode Array
Detector
ICS Series Variable Wavelength
Detector
Dionex ICS-5000 Thermal
Compartment
Dionex AS Autosampler
Dionex AS-DV Autosampler
™
MSQ Plus
1 • Introduction
Page
page 7
page 7
page 8
page 9
page 10
page 8
page 9
page 9
page 10
3