Thermo Scientific Dionex ICS-5000 Operator's Manual page 313

8 • TC Troubleshooting
This function cannot be adjusted by the user.
This error occurs if you attempt to change the setting for a read-only
parameter.
To troubleshoot:
Do not attempt to reset read-only parameters.
This operation may affect the oven's operation on timebase x,
which is currently running a batch.
If batch processing is in progress when you attempt to change a property
(such as Temperature or TempCtrl) that affects the entire TC, this error
occurs.
To troubleshoot:
To avoid disrupting operation, cancel the command.
Unknown error code.
This error occurs if Chromeleon does not recognize the error code sent by the
TC firmware.
To troubleshoot:
The firmware cannot be serviced by the user. Contact Technical Support for
Dionex products for assistance.
Unknown format of the card data.
This error occurs if Chromeleon does not recognize the format of data stored
on the column ID chip card.
To troubleshoot:
1. Open the Chromeleon 7 ePanel Set or the Chromeleon 6.8 panel tabset.
2. Press the F8 key to open the Commands dialog box.
297
Doc. 065342-06 12/11