Thermo Scientific Dionex ICS-5000 Operator's Manual page 228

Dionex ICS-5000 Operator's Manual
TC-Related Audit Trail Error Message
Operating columns above 70 °C could affect
column performance. Verify recommended
column operating conditions before setting
temperature above 70 °C.
Parameter x value exceeded its allowed range.
Set to closest valid value y.
Primary property "x" is already assigned and
cannot be changed.
Properties cannot be changed. A chip card has
not been inserted properly. Check the CardState
property for all cards and reinsert those
indicating "BusBlocked."
Properties cannot be changed if the
compartment door is open.
Properties cannot be changed—there is no card
in the card reader.
Raw data file x cannot be created.
Raw data file x cannot be created. Continuing
with network failure protection.
Raw data file x cannot be written.
Raw data file x cannot be written. Continuing
with network failure protection.
Starting data acquisition manually will overwrite
any data which has been acquired so far.
TC—Firmware download failed.
TC is not remote.
The command can format only chip cards with
an invalid data structure.
The communication interface is closed.
Reconnect the instrument.
The compartment door is open; a batch or a
program may need to wait until the door has
been closed. Please close the door.
212
Table 8-4. TC Error Messages (Continued)
Default See
Severity
Level
Warning page 289
Warning page 289
Error page 290
Error page 290
Error page 290
Error page 291
Warning page 291
Warning page 291
Warning page 291
Warning page 291
Warning page 292
Abort page 277
Abort page 282
Error page 292
Error page 292
Warning page 293
Doc. 065342-06 12/11