Thermo Scientific Dionex ICS-5000 Operator's Manual page 191

Using the Sequence Wizard
1. On the Sequence Control panel in the Chromeleon 6.8 panel tabset, click
Create Sequence (see
2. Complete the steps in the Sequence Wizard, specifying the number of
samples and standards that you want and the program and quantitation
method to use. For help at any time, click the Help button on the
Sequence Wizard page.
NOTE
3. After you finish the Sequence Wizard, the new sequence is displayed in
the Chromeleon 6.8 Browser.
Doc. 065342-06 12/11
Figure
Figure 5-4. Sequence Control Panel in Chromeleon 6.8
If preferred, you can create the sequence first and then
specify the program and quantitation method later.
You can also edit other details of the sequence (for
example, add or remove samples) after you finish the
wizard.
5-4).
5 • Operation
175