Thermo Scientific Dionex ICS-5000 Operator's Manual page 386

Dionex ICS-5000 Operator's Manual
3. Disconnect the main power cord from both its source and from the DC
rear panel.
HIGH VOLTAGE—Disconnect the main power cord from its source and
also from the rear panel of the DC.
HAUTE TENSION—Débranchez le cordon d'alimentation principal de sa
source et du panneau arrière du DC.
HOCHSPANNUNG—Ziehen Sie das Netzkabel aus der Steckdose und
der Netzbuchse auf der Rückseite des DC.
4. On the DC rear panel, remove the two screws that attach the I/O option
cover plate or the existing I/O option board to the rear panel (see
Figure
Figure 9-37. DC Rear Panel: Removing the I/O Option Cover Plate
5. Slide the new I/O option board (P/N 062201) into the rear panel opening
and press firmly to connect the board to the DC motherboard.
6. Replace the two screws.
370
9-37). Save the screws.
Remove two
screws
Doc. 065342-06 12/11