Thermo Scientific Dionex ICS-5000 Operator's Manual page 440

Dionex ICS-5000 Operator's Manual
Dionex ICS-5000 DC Detector/Chromatography Compartment Specifications
Flow Path
Detectors
Analog Signal Output
Leak Detection
Application Control
Automation
Suppression
Non -suppressed
conductivity
Suppressor wear parts
Chemical Suppression
Displacement Chemical
Suppression
Electrolytic Suppression,
Self-Regenerating.
Electrolytic Suppression,
Self-Regenerating,
External Water Mode
Salt Converter
AMMS-ICE
424
Plumbing configurations for 4 mm, 2 mm, and
0.4 mm columns, fully inert, PEEK
Any combination of two conductivity or
electrochemical detectors, upgradeable and field
installable. Dual detectors can be operated
simultaneously or independently. Optional remote
operation up to 3 m from instrument
Two analog output channels, two 24 V relays, two
TTL Out and eight TTL In lines, upgradeable and
field installable, optional
Optical leak sensor standard
Yes, standard. All DC modules come equipped with
two switched AC controllers built-in to automate
external devices and the ability to control up to six
low-pressure 2-way or 3-way valves for fluidic
automation
Yes, supported
None. No valves, pumps, peristaltic pump tubin,g
or inline filters required
2 mm and 4 mm anion and cation membrane
suppression available
2 mm and 4 mm anion and cation membrane
suppression available
0.4 mm (with optional IC Cube), 2 mm and 4 mm
anion and cation. Membrane and MonoDisc
suppression bed types available. Membrane for
capillary (0.4 mm) suppressor.
0.4 mm (with optional IC Cube), 2 mm and 4 mm
anion and cation. Membrane and MonoDisc
suppression bed types available for 2 mm and
4 mm. Membrane for capillary (0.4 mm)
suppressor.
Available in 2 mm and 4 mm versions
Available in 2 mm and 4 mm versions
Doc. 065342-06 12/11