Thermo Scientific Dionex ICS-5000 Operator's Manual page 224

Dionex ICS-5000 Operator's Manual
DC-Related Audit Trail Error Message
Compartment temperature open circuit.
Compartment over safe temperature.
Compartment temperature calibration error.
ED cell current exceeds limits error.
ED cell option disconnected.
ED cell working electrode disconnected.
ED pH offset calibration failed.
ED pH slope calibration failed.
ED reference electrode disconnected.
High pressure valve 1 error.
High pressure valve 2 error.
High pressure valve 3 error.
High pressure valve 4 error.
IC Cube 1 heater over safe temperature.
IC Cube 2 heater over safe temperature.
Lower door opened.
Lower leak sensor wet.
Reaction coil open circuit.
Reaction coil over safe temperature.
Suppressor over-current.
Suppressor over-power.
Suppressor over-voltage.
Suppressor stopped for flow rate.
Upper door opened.
208
Table 8-3. DC Error Messages (Continued)
Default See
Severity
Level
Abort page 261
Abort page 261
Warning page 261
Warning page 261
Abort page 262
Abort page 263
Warning page 263
Warning page 264
Warning page 264
Abort page 265
Error page 266
Warning page 267
Warning page 267
Abort page 267
Abort page 268
Abort page 268
Abort page 268
Abort page 269
Warning page 269
Warning page 269
Doc. 065342-06 12/11