Thermo Scientific Dionex ICS-5000 Operator's Manual page 307

8 • TC Troubleshooting
3. If the door is fully closed but the error persists, contact Technical Support
for Dionex products for assistance.
Properties cannot be changed—there is no card in the card
reader.
This error occurs if you attempt to change column ID properties for a column
for which no chip card is installed.
To troubleshoot:
Insert a column ID chip card into the appropriate slot (see Section 9.30).
Raw data file x cannot be created.
-or-
Raw data file x cannot be created. Continuing with network failure
protection.
-or-
Raw data file x cannot be written.
-or-
Raw data file x cannot be written. Continuing with network failure
protection.
If a network failure prevents Chromeleon from creating or writing to a raw
data file, the corresponding error occurs.
To troubleshoot:
Wait until batch processing is complete; then, reboot the PC and restart the
Chromeleon server.
291
Doc. 065342-06 12/11