Thermo Scientific Dionex ICS-5000 Operator's Manual page 108

Dionex ICS-5000 Operator's Manual
The Device Configuration dialog box for the selected input appears.
Figure 2-38. Assign TTL Input Control Functions
5. In the Control Functions list, select the check box of one or more
functions to be controlled by this input. When connected to a controlling
device, the device can send a signal to the input to trigger the selected
functions.
6. By default, several functions are selected. Scroll down the list and disable
all unwanted functions.
TTL Input Control Types
If the device connected to the DC does not send a normal edge signal, select
the appropriate control type. Refer to the documentation provided with the
92
The DC TTL inputs respond to four types of signals
to accommodate different controlling devices. The
default control type,
with the output signals provided by Dionex
modules.
Normal Edge
, is compatible
Doc. 065342-06 12/11