Mtu; Reserved Vxlan - H3C MSR 5600 Comware 7 Vxlan Command Reference

Examples
# Add MAC address 000f-e201-0101 to VSI vsi1. Specify Tunnel-interface 1 as the outgoing
interface.
<Sysname> system-view
[Sysname] mac-address static 000f-e201-0101 interface tunnel 1 vsi vsi1
Related commands
vxlan tunnel mac-learning disable

mtu

Use mtu to set the MTU for a VSI.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The default MTU of a VSI is 1500 bytes.
Views
VSI view
Predefined user roles
network-admin
Parameters
size : Specifies an MTU value. The value range for this argument is 300 to 65535.
Usage guidelines
The MTU set by using this command limits the maximum length of the packets that a VSI receives
from ACs and forwards through VXLAN tunnels. The MTU does not limit the maximum length of
other packets in the VXLAN VSI.
Fragmentation is disabled for a VSI that uses the default MTU. If you set a MTU for a VSI, the
packets longer than the MTU are fragmented.
Examples
# Set the MTU to 1400 bytes for VSI vxlan1.
<Sysname> system-view
[Sysname] vsi vxlan1
[Sysname-vsi-vxlan1] mtu 1400
Related commands
display l2vpn vsi

reserved vxlan

Use reserved vxlan to specify a reserved VXLAN.
Use undo reserved vxlan to restore the default.
13