Table of Contents
Advertisement
Field
Protocol: (s) - spoofing
Interface
Link
Protocol
Main IP
Description
Cause
display ppp mp
Syntax
display ppp mp [ interface mp-group mp-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface mp-group mp-number: Displays information and statistics about the specified MP-group
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ppp mp command to display information and statistics about a specific or all MP-group
interfaces.
Related commands: link-protocol ppp and ppp mp.
Description
If the network layer protocol state of an interface is shown
as UP, but its link is an on-demand link or not present at all,
its protocol attribute includes the spoofing flag (an s in
parentheses).
Abbreviated interface name.
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut down. To
recover its physical state, perform the undo shutdown
command.
Protocol connection state of the interface, which can be
UP, DOWN, or UP(s).
The main IP address of the interface.
Description of the interface.
The cause of a DOWN physical link. If the port has been
shut down with the shutdown command, this field displays
Administratively. To restore the physical state of the
interface, use the undo shutdown command.
40
Advertisement
Table of Contents
