Safety Connector Specifications (Cn8) - Omron R88M-K User Manual

3-1-15 Safety Connector Specifications (CN8)

Connection of Safety I/O Signals and Processing of External Signals
External
power supply
12 VDC ± 5% to
24 VDC ± 5%
External
power supply
12 VDC ± 5% to
24 VDC ± 5%
Safety I/O Signal Table
Safety I/O (CN8)
Pin No. Symbol
−
1
−
2
3 SF1−
4 SF1+
5 SF2−
6 SF2+
7 EDM−
8 EDM+
Shell FG
Connector for CN8 (8 pins)
Name
Industrial Mini I/O
Connector
(D-SHAPE1)
Note The recommended cable is a 6-core shielded cable with a wire size of AWG30 to AWG26 and a finished
outer diameter of 6.7 mm or less.
G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
4.7 kΩ
SF1+
4
1 kΩ
SF1- 3
4.7 kΩ
SF2+
6
1 kΩ
SF2-
5
Name
Reserved
Safety input 1
Safety input 2
EDM output
Frame ground
Model
2013595-1
10 Ω
Function and interface
Do not connect.
Inputs 1 and 2 for operating the STO function, which are 2
independent circuits. This input turns OFF the power
transistor drive signals in the Servo Drive to cut off the
current output to the motor.
A monitor signal is output to detect a safety function failure.
Connected to the ground terminal inside the Servo Drive.
Manufacturer
Tyco Electronics AMP KK
3 Specifications
EDM+
8
Maximum service voltage:
30 VDC or less
Maximum output current:
50 mADC
EDM-
7
Leakage current:
0.1 mA max.
Residual voltage:
1.7 V max.
Shell
FG
OMRON model number
R88A-CNK81S
3-33
3