Omron R88M-K User Manual page 18

Safety Precautions
Maintenance and Inspection
After replacing the Servo Drive, transfer to the new Servo Drive all data needed to resume
operation, before restarting operation.
Equipment damage may result.
Never repair the Servo Drive by disassembling it.
Electric shock or injury may result.
Be sure to turn OFF the power supply when the Servo Drive is not going to be used for a
prolonged period of time.
Injury may result.
Location of Warning Label
The Servo Drive bears a warning label at the following location to provide handling warnings.
When handling the Servo Drive, be sure to observe the instructions provided on this label.
Warning label display location
10
(R88D-KN02H-ECT)
G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Caution