Omron R88M-K User Manual page 676

Appendices
Event name Object Error
Meaning The object area data in non-volatile memory is corrupted.
Source EtherCAT Master Function Module
Error attributes Level
Effects User program
Indicators EtherCAT NET RUN
---
System-defined Variable
variables
None
Cause and Assumed cause
correction
Noise
Non-volatile memory failure
Attached None
information
Precautions/ "36" is displayed on the Servo Drive front panel and F136 is given as the AlarmCode (4001 hex).
Remarks
Event name Object Error
Meaning The object area data in non-volatile memory is corrupted.
Source EtherCAT Master Function Module
Error attributes Level
Effects User program
Indicators EtherCAT NET RUN
---
System-defined Variable
variables
None
Cause and Assumed cause
correction
Noise
Non-volatile memory failure
Attached None
information
Precautions/ "36" is displayed on the Servo Drive front panel and F236 is given as the AlarmCode (4001 hex).
Remarks
A-126
Source details
Minor fault Recovery
Continues. Operation
EtherCAT NET ERR
---
Data type
---
Remedy
Reset all of the objects. Implement
noise countermeasures.
If the error persists, replace the Servo
Drive.
Source details
Minor fault Recovery
Continues. Operation
EtherCAT NET ERR
---
Data type
---
Remedy
Reset all of the objects. Implement
noise countermeasures.
If the error persists, replace the Servo
Drive.
G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Event code 14A90000 hex
Slave Detection
timing
Error reset (after Log category
cycling slave
power)
Power drive circuit is OFF for relevant slave.
EtherCAT LINK/ACT
---
Name
---
Prevention
Reset all of the objects. Implement
noise countermeasures.
None
Event code 14AA0000 hex
Slave Detection
timing
Error reset (after Log category
cycling slave
power)
Power drive circuit is OFF for relevant slave.
EtherCAT LINK/ACT
---
Name
---
Prevention
Reset all of the objects. Implement
noise countermeasures.
None
When
establishing
communications
after turning ON
power to the
slave
System
When
establishing
communications
after turning ON
power to the
slave
System