4-2
Connector Specifications
This section provides the Connector Specifications of the IPC Application Controller.
4-2-1
Power Connector Specifications
The power supply connector is locked when inserted to prevent unintentional disconnection.
The connector can only be inserted the correct way.
The connector is a Phoenix Contact type SPC5/2-STCL-7.62 BK (1711708).
The IPC provides protection against reverse polarity.
1
The pin layout represents the power connector on the IPC.
Pin
1
24 VDC
2
0 VDC
Conductor isolation rating
Termination rating
Additional Information
• Refer to 5-4-3 Wire the Power Connector on page 5-28 for wiring details.
• Refer to 5-4-2 Ground on page 5-21 for grounding details.
IPC Application Controller User's Manual (I632)
2
Item
Description
Specifications
90°C
90°C
4 Specifications
4
4-11