Omron R88M-K User Manual page 17

Safety Precautions
Operation and Adjustment
Caution
Conduct a test operation after confirming that the equipment is not affected.
Equipment damage may result.
Before operating the Servo Drive in an actual environment, check if it operates correctly
based on the parameters you have set.
Equipment damage may result.
Never adjust or set parameters to extreme values, because it will make the operation
unstable.
Injury may result.
Separate the Servomotor from the mechanical system and check its operation before
installing the Servomotor to the machine.
Injury may result.
If an error occurs, remove the cause of the error and ensure safety, and then reset the
alarm and restart the operation.
Injury may result.
Do not use the built-in brake of the Servomotor for normal braking operation.
Failure may result.
Do not operate the Servomotor connected to an excessive load inertia.
Failure may result.
Install safety devices to prevent idling or locking of the electromagnetic brake or the gear
head, or leakage of grease from the gear head.
Injury, damage, or taint damage result.
If the Servo Drive fails, cut off the power supply to the Servo Drive at the power supply.
Fire may result.
Do not turn ON and OFF the main Servo Drive power supply frequently.
Failure may result.
G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications) 9