Setting Mstp Parameters - Huawei Quidway S9300 Configuration Manual

8 MSTP Configuration
l
----End
Example
Run the display stp command, and you can find that the operation mode of the spanning tree is
MSTP; VLANs are mapped to MSTI 0; the S9300 uses the default priority 32768. The following
is an example:
<Quidway> display stp instance 0 interface gigabitethernet 1/0/0
-------[CIST Global Info][Mode MSTP]-------
CIST Bridge
Bridge Times
CIST Root/ERPC
CIST RegRoot/IRPC
CIST RootPortId
BPDU-Protection
TC or TCN received
STP Converge Mode
Time since last TC
----[Port3(GigabitEthernet1/0/0)][FORWARDING]----
Port Protocol
Port Role
Port Priority
Port Cost(Dot1T )
Desg. Bridge/Port
Port Edged
Point-to-point
Transit Limit
Protection Type
Port Protocol Type
PortTimes
BPDU Sent
BPDU Received
Run the display stp region-configuration command, and you can find that the effective MST
region name is huawei, and the revision level of the MST region is 0. You can also view the
mapping between MSTIs and VLANs. The following is an example:
<Quidway> display stp region-configuration
Oper Configuration:

8.4 Setting MSTP parameters

This section describes how to set MSTP parameters.
8.4.1 Establishing the Configuration Task
8.4.2 Setting MSTP Network Parameters of the S9300
8.4.3 Setting MSTP Parameters of an Interface
8.4.4 Switching an Interface to the MSTP Mode
8-14
Run the display stp region-configuration command to check the effective configuration
of the MST region.
:32768.00e0-fc0e-a421
:Hello 2s MaxAge 20s FwDly 15s MaxHop 20
:32768.00e0-fc0e-a421 / 0
:32768.00e0-fc0e-a421 / 0
:0.0
:disabled
:8
:Fast
:0 days 23h:9m:30s
:enabled
:CIST Designated Port
:128
:Config=100 / Active=100
:32768.00e0-fc0e-a421 / 128.1229
:Config=disabled / Active=disabled
:Config=auto / Active=true
:3 packets/hello-time
:None
:Config=auto / Active= dot1s
:Hello 2s MaxAge 20s FwDly 15s RemHop 0
:0
TCN: 0, Config: 0, RST: 0, MST: 0
:0
TCN: 0, Config: 0, RST: 0, MST: 0
Format selector :0
Region name :huawei
Revision level :0
Instance Vlans Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)