Huawei Quidway S9300 Configuration Manual page 275

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
[CE3] stp enable
# Configure CE4.
[CE4] stp enable
# Configure PE1.
[PE1] stp enable
# Configure PE2.
[PE2] stp enable
Step 2 Configure the BPDUs sent from CE1 and CE2 to contain VLAN tag 100. Configure the BPDUs
sent from CE3 and CE4 to contain VLAN tag 200.
# Configure CE1.
[CE1] vlan 100
[CE1-vlan100] quit
[CE1] interface gigabitethernet 1/0/0
[CE1-GigabitEthernet1/0/0] port link-type trunk
[CE1-GigabitEthernet1/0/0] port trunk allow-pass vlan 100
[CE1-GigabitEthernet1/0/0] stp bpdu vlan 100
# Configure CE2.
[CE2] vlan 100
[CE2-vlan100] quit
[CE2] interface gigabitethernet 1/0/0
[CE2-GigabitEthernet1/0/0] port link-type trunk
[CE2-GigabitEthernet1/0/0] port trunk allow-pass vlan 100
[CE2-GigabitEthernet1/0/0] stp bpdu vlan 100
# Configure CE3.
[CE3] vlan 200
[CE3-vlan200] quit
[CE3] interface gigabitethernet 1/0/0
[CE3-GigabitEthernet1/0/0] port link-type trunk
[CE3-GigabitEthernet1/0/0] port trunk allow-pass vlan 200
[CE3-GigabitEthernet1/0/0] stp bpdu vlan 200
# Configure CE4.
[CE4] vlan 200
[CE4-vlan200] quit
[CE4] interface gigabitethernet 1/0/0
[CE4-GigabitEthernet1/0/0] port link-type trunk
[CE4-GigabitEthernet1/0/0] port trunk allow-pass vlan 200
[CE4-GigabitEthernet1/0/0] stp bpdu vlan 200
Step 3 Configure the PE devices to change the destination MAC address of the BPDUs sent by the CE
devices.
# Configure PE1.
[PE1] bpdu-tunnel stp group-mac 0100-5e00-0011
# Configure PE2.
[PE2] bpdu-tunnel stp group-mac 0100-5e00-0011
Step 4 Enable the PE interfaces to transparently transmit BPDUs of the CE devices to the PE devices.
# Configure PE1.
[PE1] vlan 100
[PE1-vlan100] quit
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 BPDU Tunnel Configuration
9-39