Configuring A Qinq-Based Bpdu Tunnel - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
The VLAN ID ranges from 1 to 4094. To create multiple VLANs, perform this step repeatedly.
Step 3 Run:
quit
Return to the system view.
Step 4 Run:
interface interface-type interface-number
The view of the CE interface at the PE side is displayed.
Step 5 Run:
port link-type trunk
The link type of the interface is set to trunk.
Step 6 Run:
port trunk allow-pass vlan { { vlan-id1 [ to vlan-id2 ] } &<1-10> | all }
The VLAN ID of the BPDUs that the CE allows to pass through is set.
Step 7 Run:
stp bpdu vlan vlan-id
The VLAN ID contained in the BPDUs sent from the CE interface is set.
The VLAN ID specified in the stp bpdu vlan command must exist on the local CE.
----End

9.5.4 Configuring a QinQ-based BPDU Tunnel

Context
Choose
the PE and CE devices of the same role
When PE and CE devices play different roles, the CE device functions as a customer, and the
PE and P devices function as providers.
When PE and CE devices play the same role, they both function as customers or providers.
Procedure
l
Issue 03 (2009-08-20)
NOTE
Ensure that the BPDU packets received by this port contain the specified VLAN tag.
Configuration for the PE and CE devices of different roles
Configuration for the PE and CE devices of different roles
1. Run the following command on the PE and P devices:
system-view
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 BPDU Tunnel Configuration
according to the roles of the PE and CE devices.
or Configuration for
9-21