Optional) Setting Retransmission Parameters On A Radius Server; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
The traffic unit is set for a RADIUS server.
By default, the traffic is expressed in bytes on the S9300.
----End
1.5.8 (Optional) Setting Retransmission Parameters on a RADIUS
Server
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server timeout seconds
The timeout interval for a RADIUS server to send response packets is set.
By default, the timeout interval for a RADIUS server to send response packets is five seconds.
To check whether a RADIUS server is available, the S9300 periodically sends request packets
to the RADIUS server. If no response is received from the RADIUS server within the timeout
interval, the S9300 retransmits the request packets.
Step 4 Run:
radius-server retransmit retry-times
The number of times for retransmitting request packets on a RADIUS server is set.
By default, the number of times for retransmitting request packets on a RADIUS server is 3.
After retransmitting request packets to a RADIUS server for the set number of times, the
S9300 considers that the RADIUS server is unavailable.
----End

1.5.9 Checking the Configuration

Prerequisite
The configurations of the RADIUS server template are complete.
Procedure
l
----End
1-20
Run the display radius-server configuration [ template template-name ] command to
check the configuration of the RADIUS server template.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 01 (2009-07-28)