Huawei Quidway S9300 Configuration Manual page 156

5 QinQ Configuration
traffic-policy name2 inbound
#
return
<S9300-B> display current-configuration interface gigabitethernet 2/0/2
#
interface GigabitEthernet2/0/2
port hybrid untagged vlan 2
traffic-policy name1 inbound
#
return
<S9300-B> display current-configuration interface gigabitethernet 2/0/3
#
interface GigabitEthernet2/0/3
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
If the configurations on S9300-A and S9300-B are correct, you can obtain the following
information:
l
l
l
l
l
----End
Configuration Files
The following lists the configuration files of the S9300.
l
#
sysname S9300-A
#
vlan batch 2 to 3
#
traffic classifier name1 operator or precedence 5
if-match 1 vlan-id 10 to 30
if-match 2 vlan-id 31 to 50
traffic classifier name2 operator or precedence 10
if-match 1 vlan-id 51 to 60
#
traffic behavior name1
nest top-most vlan-id 2
traffic behavior name2
nest top-most vlan-id 3
#
traffic policy name1
classifier name1 behavior name1
traffic policy name2
classifier name2 behavior name2
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2
traffic-policy name1 inbound
#
interface GigabitEthernet1/0/2
port hybrid untagged vlan 3
traffic-policy name2 inbound
#
interface GigabitEthernet1/0/3
5-24
PC1 users on the network of User 1 can communicate with each other.
TV1 users on the network of User 1 can communicate with each other.
PC2 users on the network of User 2 can communicate with each other.
PC1 users and TV1 users are separated from each other.
The networks of User 1 and User 2 are isolated from each other.
Configuration file of S9300-A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)