Establishing The Configuration Task; Setting The Operation Mode Of The S9300 - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
8.3.8 Checking the Configuration

8.3.1 Establishing the Configuration Task

Applicable Environment
You need to perform this configuration task when you want to:
l
l
Pre-configuration Tasks
Before adding anS9300 to a specified MST region, complete the following tasks:
l
l
Data Preparation
Before adding anS9300 to a specified MST region, you need the following data.
No.
1
2
3
4

8.3.2 Setting the Operation Mode of the S9300

Context
Do as follows on the S9300 that needs to be added to the MST region.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
stp mode { stp | rstp | mstp }
The operation mode of the S9300 is set.
Issue 03 (2009-08-20)
Add an S9300 that does not run MSTP to an MST region.
Change the MST region attribute of an S9300 running MSTP, that is, add it to another MST.
Configuring physical attributes of the ports
Configuring VLAN features of the ports
Data
Name of the MST region that the S9300 belongs to
Mapping between VLANs and MSTIs
MSTP revision level of the MST region
Priority of the S9300 in the MSTI
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MSTP Configuration
8-9