Optional) Setting The Ldt Interval On An Interface; Optional) Setting The Recovery Time Of A Blocked Interface - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
loop-detection disable
LDT is disabled on the interface.
By default, LTD is enabled on an interface.
----End

10.2.6 (Optional) Setting the LDT Interval on an Interface

Context
Do as follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
loop-detection interval-time interval-time
The LDT interval is set on the interface.
By default, the LDT interval is 5 seconds.
----End

10.2.7 (Optional) Setting the Recovery Time of a Blocked Interface

Context
Do as follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 LDT Configuration
10-5