Example For Configuring Selective Qinq - Huawei Quidway S9300 Configuration Manual

5 QinQ Configuration
Ping a remote host on the same VLAN in another office location of Enterprise 2 from a host of
Enterprise 2. If it can ping the remote host, it indicates that hosts in different locations of
Enterprise 2 can communicate with each other.
Ping a host of Enterprise 2 from a host in any office location of Enterprise 1. If it fails to ping
the host of Enterprise 2, it indicates that the two enterprises are isolated from each other.
----End
Configuration Files
The following lists the configuration files of the S9300.
l
#
sysname S9300-F
#
vlan batch 10 20
#
interface GigabitEthernet1/0/1
port link-type dot1q-tunnel
port default vlan 10
#
interface GigabitEthernet2/0/1
port link-type dot1q-tunnel
port default vlan 20
#
interface GigabitEthernet3/0/1
port link-type dot1q-tunnel
port default vlan 10
#
interface GigabitEthernet4/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
return
l
#
sysname S9300-G
#
vlan batch 20
#
interface GigabitEthernet1/0/1
port link-type dot1q-tunnel
port default vlan 20
#
interface GigabitEthernet2/0/1
port link-type dot1q-tunnel
port default vlan 20
#
interface GigabitEthernet3/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
return

5.7.2 Example for Configuring Selective QinQ

Networking Requirements
As shown in
communicate with each other through the ISP network. Two types of users exist on the network
5-16
Configuration file of S9300-F
Configuration file of S9300-G
Figure 5-2, User 1 and User 2 belong to different networks. They need to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)