Figure 7-2 Networking Diagram For Configuring Routed Proxy Arp - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Configuration Files
The following is the configuration file of the S9300.
#
sysname Quidway
#
vlan batch 2 to 3
#
interface Vlanif2
ip address 2.2.2.2 255.255.255.0
arp expire-time 60
arp detect-times 2
#
interface Vlanif3
ip address 10.2.2.2 255.255.255.0
#
interface GigabitEthernet 1/0/1
port hybrid tagged vlan 2
#
interface GigabitEthernet 1/0/2
port hybrid tagged vlan 3
#
arp static 10.2.2.3 00e0-fc01-0000 vid 3 interface GigabitEthernet1/0/2
#
return
7.9.2 Example for Configuring Routed Proxy ARP
Networking Requirements
As shown in
respectively, and the network IDs of the two LANs are 172.16.0.0/16. Host A and Host B are
not configured with the default gateway. It is required that routed proxy ARP should be enabled
on the S9300 so that hosts in the two LANs can communicate.

Figure 7-2 Networking diagram for configuring routed proxy ARP

Host A
172.16.1.2/16
0000-5e33-ee20
Configuration Roadmap
The configuration roadmap is as follows:
1.
Issue 03 (2009-08-20)
Figure 7-2, GE 1/0/0 and GE 1/0/1 of the S9300 are connected to a LAN
GE1/0/0
172.16.1.1/24
00e0-fc39-80aa
VLAN 2
S9300 A
Ethernet A
Assign an IP Address to an interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Host B
172.16.2.2/16
0000-5e33-ee10
GE1/0/1
172.16.2.1/24
00e0-fc39-80bb
VLAN 3
Ethernet B
7 ARP Configuration
7-19