Specifying The Outer Vlan Id; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

5 QinQ Configuration

5.3.3 Specifying the Outer VLAN ID

Context
Do as follows on the S9300 to be configured with interface QinQ.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN is created.
Step 3 Run:
quit
Return to the system view.
Step 4 Run:
interface interface-type interface-number
The interface view is displayed.
Step 5 Run:
port default vlan vlan-id
The VLAN ID (default VLAN) of the outer VLAN tag is set.
----End

5.3.4 Checking the Configuration

Procedure
Step 1 Run the display current-configuration interface interface-type interface-number command to
display the QinQ configuration on the interface.
----End
Example
In the user view, run the display current-configuration interface command. If the interface
type, and the outer VLAN ID are correct, it means that the configuration is successful. The
following is an example:
<Quidway> display current-configuration interface gigabitethernet 3/0/1
#
interface GigabitEthernet3/0/1
port link-type dot1q-tunnel
port default vlan 4
#
return
5-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)